complete set $5.500 k series under warranty somemore...........
clean,simple & sharp looking dial(sandwish)plus light & comfortable ! Best !
GONE !
Monday, March 29, 2010
Panerai pam 176 "K" series
complete set $5.500 k series under warranty somemore...........
clean,simple & sharp looking dial(sandwish)plus light & comfortable ! Best !
GONE !
Wednesday, March 17, 2010
Fresh From The Ocean !
AP ROO $20,000 nett complete set G series 90% mint (Sold !)
AP 15300 with cal 3120 60hrs power reserve complete set 99% mint ( $old !)
thanks mr fabian poh !
btw thanks for the dinner !
Cartier Roadster gmt $5,500 nett complete set 90% mint
Monday, March 15, 2010
What is a Rattrapante?
A "Rattrapante" is a chronograph with an added second hand, to allow, for example, lap times in a multi-lap event to be read off without stopping the chronograph. A chronograph is usually started with one pusher, which starts both second hands moving (one superimposed over the other). When the operator desires to read an intermediate time, he/she pushes a second pusher. On the dial, one of the second hands stops (the "split" hand), while the main second hand continues. If the second pusher is pressed again, the split seconds hand "catches up" with the main second hand, and is ready to be used again.
Interestingly, three languages describe this function in different ways: "Rattrapante" is the French term for "catch up" (describing the motion of the split hand); the German term for this function is "Doppelchronograph", or double chronograph; the English term is "Split Seconds" (describing the appearance of the second hand when the function is activated).
An example of this function is on the IWC Doppelchronograph or Breitling Chronoracer (a mecaquartz (!) rattrapante).
Interestingly, three languages describe this function in different ways: "Rattrapante" is the French term for "catch up" (describing the motion of the split hand); the German term for this function is "Doppelchronograph", or double chronograph; the English term is "Split Seconds" (describing the appearance of the second hand when the function is activated).
An example of this function is on the IWC Doppelchronograph or Breitling Chronoracer (a mecaquartz (!) rattrapante).
What is a chronometer? What is a chronograph?
These two terms are commonly confused among new watch aficionados. They actually have very little to do with each other.
A chronometer is a watch which has passed a test given by the Contrôle Officiel Suisse des Chronometres, or COSC. The COSC is an official Swiss government agency which tests watches to ensure that they fit within a narrow-but-usually-obtainable window of acceptable error (i.e., the rate in all positions falls into the range of -4 seconds/day to +6 seconds/day). While some watch companies tout their products as having a COSC certificate, it really is not that difficult to pass the test, and over 95% of the watches submitted pass. Another factor to consider is that the COSC does not test watches as they are sold in the store, but movements fitted with a temporary case, dial and hands. In addition, the COSC certificate cannot say anything about how the movement was handled after testing.
Several watch manufacturers actually put more stringent tests than the COSC procedures on all of their watch production (the JLC Master Control 1000-Hour series is probably the most well known.)
A chronograph is a watch that tells the time of day and also allows the user to time events of short-to-medium durations (i.e. from a few seconds to a few hours, typically). This is usually done in a mechanical watch through the central seconds hand, and one or more subdials (the regular, or continuous seconds, is also located on a dial). Chronographs are of varying usefulness, and are an interesting complication to put on a watch, as they often give the watch a sporty image. In addition to elapsed time, chronographs are often fitted with several scales designed to measure other things, such as pulse rate or units manufactured per hour.
A typical modern chronograph is operated with two pushers: one to start and stop the timing, and a second to reset the hands to zero when the timing is stopped. (In some older chronos with only one-button for control, the sequence of pushes was start-stop-reset - there was no provision to continue timing once the mechanism was stopped.)
A chronometer is a watch which has passed a test given by the Contrôle Officiel Suisse des Chronometres, or COSC. The COSC is an official Swiss government agency which tests watches to ensure that they fit within a narrow-but-usually-obtainable window of acceptable error (i.e., the rate in all positions falls into the range of -4 seconds/day to +6 seconds/day). While some watch companies tout their products as having a COSC certificate, it really is not that difficult to pass the test, and over 95% of the watches submitted pass. Another factor to consider is that the COSC does not test watches as they are sold in the store, but movements fitted with a temporary case, dial and hands. In addition, the COSC certificate cannot say anything about how the movement was handled after testing.
Several watch manufacturers actually put more stringent tests than the COSC procedures on all of their watch production (the JLC Master Control 1000-Hour series is probably the most well known.)
A chronograph is a watch that tells the time of day and also allows the user to time events of short-to-medium durations (i.e. from a few seconds to a few hours, typically). This is usually done in a mechanical watch through the central seconds hand, and one or more subdials (the regular, or continuous seconds, is also located on a dial). Chronographs are of varying usefulness, and are an interesting complication to put on a watch, as they often give the watch a sporty image. In addition to elapsed time, chronographs are often fitted with several scales designed to measure other things, such as pulse rate or units manufactured per hour.
A typical modern chronograph is operated with two pushers: one to start and stop the timing, and a second to reset the hands to zero when the timing is stopped. (In some older chronos with only one-button for control, the sequence of pushes was start-stop-reset - there was no provision to continue timing once the mechanism was stopped.)
Subscribe to:
Posts (Atom)
